What are the using skills of the straw pick up baler machine?

Our Taizy straw pick up baler machine has a simple structure and is easy to operate. But there are also some skills that can make the machine work better. Here are some tips, I hope they will help you. Also, the below-using skill is also suitable for hay cutter and baler machines.

Using skills of the straw pick up baler machine

1, The straw pick up baler machine is easy to lose adjustment. When the humidity of the wheat section is more significant, easy to pick up the bale, and can adjust the density hole. When the wheat section is dry, fragile, and not easy to pick up and feed, should adjust the high-density hole. In addition, you can also adjust the number of laps of the rope to bind the straw. Wheat straw dry, increase the number of laps, wheat straw wet, reduce the number of laps.

2, Picking up grass in power machinery driving speed can be slightly faster. The small four-wheel drive is suitable for 2 – a gear.

3, The host and baler connection of the straw pick up baler machine. The limit arm should be connected properly, too loose to play the role of limit, the limit arm is easy to wear on the rear tire of the main machine. At the same time, the machine swing amplitude is too large but also easy to cause damage to their own parts.

4, Adjustment of the number of laps of rope.

5, The wearing parts of the straw pick up baler machine. Protection screws and blades should be equipped with grass, so as not to delay the work time.

6, After the straw pick up baler machine is equipped, drive to the wheat field after harvesting. Then, check whether the power of the power machine and the baler are in good contact. Then start, pick up, and bale. Stop and increase the throttle when you hear the alarm to make the baler bale quickly. Then, when you hear the sound of the rope being cut, pull the rope slightly and lift the back cover of the baler to make the ball fall off the machine.