圆形青贮饲料包装机的故障及解决方法
Round silage packing machines are used by many breeding plants. Various problems can occur when the machine is not used for a long time. In order to allow users to solve the problems to use the silage packing machine smoothly, the following are the main problems and solutions pointed out by Taizé manufacturers!
First-tire deformation of the round silage packing machine
Cause: After the round silage packing machine stops use, its own weight is completely borne by the tires, thus causing the parts in contact with the ground to bear too much pressure and deformation.
Solution: When parking the silage packing machine for a long time, the silage baler and wrapper machine can be supported. Or every few days will be one machine before and after moving, avoid one machine weight long-term pressure on the same location of the tire, to ensure that the tire does not deform.
Second-baling and wrapping machine surface rust
Reason: The silage baler and wrapper machine are long put by acid, alkali, salt water solution and oxygen, humid air, and other media, so that the metal surface electrochemical corrosion, resulting in the gradual corrosion of metal.
Solutions:
- 储存青贮饲料打包机和裹膜机前彻底清洁。应清除一体机上的灰尘和油污，并对润滑部位进行润滑。
- 补漆。找到掉漆的部分，重新喷漆。
- 防潮。储藏室应通风、干燥。尽量保持相对湿度低于70%。
Third-round bale wrapper’s water tank is frozen and cracked
Reason: When the temperature is at 0℃ and below if the water in the engine is not released, the water will freeze and crack the body and water tank due to the phenomenon of perverse expansion of water.
Solution: Before the round silage packing machine is parked for a long time, the cooling water inside the machine needs to be thoroughly released.
Fourth-silage packing machine’s rubber parts aging
Reasons: The rubber parts on the round silage packing machine are mainly tires, hydraulic oil pipes, and so on. In the long-term storage process, they are subject to sunlight exposure, external deformation, staining with oil, and other reasons, the surface layer of these parts will become sticky or hardened and brittle or even broken down.
Solutions:
- 避免阳光直射，将圆捆包膜机存放起来。
- 防止橡胶件沾上油污，如不慎沾上，应立即擦洗干净。
- 防止长期受力变形。
